Doors: Embossed

Republic's complete line of commercial hollow metal embossed panel doors provide a wide range of design flexibility for your architectural needs. Whether you select a traditional design or a HD design door, you will be adding a beautiful entrance to any architectural opening with rich and distinctive panel embossments.

  • SDI Levels 1-3
  • Steel Door Performance with Decorative Designs
  • 6 Panel Options
    • 1 3/8" thick
    • 8 foot with elongated panels
    • STC 40 (STC hardware included)
  • High Definition designs
    (1 Panel, 2 Panel, and 2 Panel Arch Top)
Design Gallery
  • 1 Panel Door
  • 2 Panel Door
  • 2 Panel Arch Top
  • 4 Panel Door
  • 6 Panel Door
  • 8 Panel Door
  • Half Glass Panel Door
  • Sunburst Panel Door
  • Cross Buck Panel Door

 

High Definition Corners Gallery (1 Panel, 2 Panel, and 2 Panel Arch Top)
  • 1 and 2 Panel High Defintion Corner
  • 2 Panel Arch Top High Definition Corner

 

Brochure (PDF) Tech Data (PDF) Tech Data

Embossed Doors Technical Data

  • Edge Seam Construction: Visible seam (Optional continuously welded seamless or intermittently welded seamless except in 20 gage)
  • Thickness: 1 3/4 inch (1 3/8 inch available ins 6 Panel only)
  • Actual Door Size: Door undersized from nominal by 1/4 inch width and 7/8 inch height. Standard undercut is 3/4 inch.
  • Hinge Rail and Reinforcement: Hinge edge is non-beveled and reinforced with a continuous 16 gage steel channel (optional 10 gage) projection welded at a maximum 5 inches on center. Additional reinforcement plates are provided at the hinge location to give a total of 3/16 inch reinforcement (Backset 1/4 inch).
  • Lock Rail: Lock edge is non-beveled and reinforced with a continuous 16 gage steel channel projection welded at a maximum 5 inches on center. 16 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A115 standards. Optional 14 gage in DE Series. Optional beveled 1/8 inch in 2 inches
  • Top Channel: Top channel is a flush 16 gage steel channel, projection welded at a maximum 2 1/2 inches on center.
  • Bottom Channel: Bottom Channel is inverted 16 gage steel channel, projection welded at a maximum 2 1/2 inches on center
  • Cores Available: 1 to 1.25 pound density Polystyrene standard
  • Face Skins: 20, 18, or 16 gage faces drawn embossed raised panels both inside and out. Optional wood grain embossed on 6 panel doors only. Note: 16 gage is only available in 6 panel and 4 panel designs
  • Closer Reinforcement (optional): 14 gage 18 inch x 6 inch (Optional 12 gage)
  • Size Availabilty: Minimum 2 foot 6 inch x 6 foot 8 inch (2'6"x6'"), Maximum 3 foot 6 inch x 8 foot(3'6"x8'0"), Maximum 20 gage is 3 foot x 7 foot (3'0"x7'0"). Optional 3 foot x 8 foot (3'0"x8'0") 6 panel design with elongated panel embossments. Note: 2 foot 6 inch (2'6") wide embossed panel doors will have a special lock height and is not ADA compliant.
  • SDI 100 Level / Model: Level 1-3 and Model 1-2 (Maximum Duty Performance Level A)
  • Fire Label Range: 20 minutes through 3 hour Underwriters Laboratory or Warnock Hersey
  • Universal Standard / Heavy Weight Hinge: Hinge fillers are used allowing for an easy modification from standard to heavy weight hinge preparations.
  • Handing Design: Non-Handed standard (optional handed)

Universal Rough Opening Calculator

Instructions: Use decimal inches, face dimensions, and nominal opening size for butted application
Result...
× Close

Drywall Rough Opening Calculator

Instructions: Use decimal inches and results are for standard 2 inch face
Width must be number (ex. 99 or 99.99)
Height must be number (ex. 99 or 99.99)
Result...
× Close