The Best Door In The Industry
Navigation
Products
Specialty
Resources
STC Rated Door
Flush Top
Proprietary Sound Core by Republic
Hinge
Bottom Channel
Acoustical (STC rated) Doors (DE and DL Series)
Republic′s acoustical/sound transmission control doors are tested in accordance with ASTM E90 & E413 and are available in STC ratings of 35, 38, 42, 48, 50, and 52. Doors are available in cold rolled steel or galvanealed (A60) steel. Face sheets are continuously welded to hinge and lock channels. SDI Level 4 - Physical performance level A
Features
- 1 ¾" (44.4) full flush design, rated for light to maximum-duty use
- Proprietary sound resistant core
- Hinge edge is non-beveled and reinforced with a full height 16 or 10 gauge steel channel projection welded at a maximum of 5" on center
- 16 gauge flush top and bottom channels projection welded to both skins on 2½" centers
- Doors are prepared for 4½" standard or heavy weight, full mortise template hinges
- Lock edge is non-beveled and reinforced with a continuous 16 or 14 gauge channel, mortised and cylindrical lock reinforcements are integral 16 or 14 gauge reinforcements
- Seamless vertical edges
- Doors are thoroughly cleaned, phosphatized, and primed with a coat of force cured rust inhibiting primer that meets and/or exceeds the requirements of ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240 hour continuous humidity test per ASTM D4585)
- Doors are individually packaged and fully plastic wrapped to prevent damage
Available Options
- 14 gauge closer reinforcement (standard option)
- 12 gauge closer reinforcement
- A60 galvanealed or G90 galvanized
- Lock edge beveled 1/8" in 2"
- Glass lights (contact factory)
- Fire labeling up to 3 hours
- Sizes available: Maximum 4′" x 8′0" single - 8′0" x 8′0" pair
- Finish paint (Republic standard and custom colors)
Acoustical (DE and DL Series) Information
Technical Data (PDF 68KB)