The Best Door In The Industry
Navigation
Products
Specialty
Resources
Bullet Resistant Door
Level 1 Core
Level 2 and 3 Core
Levels 4-8 Core
Bullet Resistant Doors (DE Series)
Republic′s bullet resistant DE series doors are tested and labeled in accordance with UL752 and are available in all 8 levels of bullet resistant protection. Doors are available in cold rolled steel or galvanealed (A60) steel. Face sheets are continuously welded to hinge and lock channels. SDI Level 4 - Physical performance level A
Features
- 1 ¾" (44.4) full flush design, rated for light to maximum-duty use
- Polystyrene or mineral wool insulation
- Hinge edge is non-beveled and reinforced with a full height 10 gauge steel channel projection welded at a maximum of 5" on center
- 16 gauge flush top and inverted bottom channels welded to both skins
- Lock edge is non-beveled and reinforced with a continuous 14 gauge channel, mortised and cylindrical lock reinforcements are integral 14 gauge reinforcements
- Doors are thoroughly cleaned, phosphatized, and primed with a coat of force cured rust inhibiting primer that meets and/or exceeds the requirements of ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240 hour continuous humidity test per ASTM D4585)
- Doors are individually packaged and fully plastic wrapped to prevent damage
Available Options
- 14 gauge closer reinforcement (standard option)
- 12 gauge closer reinforcement
- A60 galvanealed or G90 galvanized
- Continuously welded seamless design or filled seamless design
- Lock edge beveled 1/8" in 2"
- 4½", 5", and continuous hinge preparations
- Glass lights (contact factory)
- Fire labeling up to 3 hours
- Pairs (must incorporate an astragal)
- Sizes available: Minimum 1′0" (305) x 1′0" (305), Maximum 5′0" (1524) x 10′0" (3048)
- Finish paint (Republic standard and custom colors)
Bullet Resistant - DE Series Information
Tech Data (PDF 2MB)